Digital OverPrintVarnish and white inkjet-ink demonstration at InPrint

At iNPRINT Munich from November 12th to 14th, 2019 a consortium of four companies; ACTEGA, adphos, ideeGO & Seiko Instruments demonstrates the possibilities of water-based inks and varnishes.

Water-based inkjetable OPV makes set-up cost obsolete!

On the booth 730 of the Japanese printhead-manufacturer Seiko Instruments a water-based overprint varnish by ACTEGA will be ink-jetted with Seiko’s printhead RC1536-L onto a pre-printed paper-roll to demonstrate the versatility of a transparent fluid-application. The liquid will be applied in a 30 micron (wet) thick layer on a roll

Read more

Broadening the range of applications for water-based inks!

As inkjet printing progresses, becoming faster and more reliable, regulatory questions like food-contact (Swiss Ordinance, etc.) and health and safety in décor applications (RAL for wallpaper, etc.) play an increasingly important role. This is where UV-curable inks often reach their limits, as their composition of reactive chemistry is often not compliant with health and safety requirements.

Water-based inks can solve this challenge, with a similar application process as UV-curable inks, but without the non-compliant materials. Water-based inks are comprised of binders, dyes

Read more

Adphos Goes Upside Down – First Inkjet, Now Rotogravure

Digitalisation is a subject that has now reached most industries. In print, the digital route has started in the eighties – with the introduction of laser- and inkjet printers in the office. Forty years later, inkjet print has reached the industry and speeds of 300 m / min are no longer impossible.

aNIR by adphos is used in inkjet print since 1997. Back then, Scitex, now part of Kodak, used aNIR to dry water-based inks on thermo-sensitive paper. Since then, adphos drying-concepts are used, when water needs to be evaporated – the faster the printer, the more ink is jetted, the more effective is adphos

Read more

adphos Digital Printing GmbH supports TheIJC Düsseldorf!

adphos Digital Printing GmbH, one of the world’s leading experts in inkjet drying and curing, will be present at the 6th European edition of TheIJC (The Inkjet Conference) in Düsseldorf at the Crowne Plaza Düsseldorf-Neuss, Germany on October 29-30, 2019

adphos is supporting this event with our 25 years’ experience in thermal processing. Through the investigation and delivery of thousands of drying/curing projects adphos has gained a great depth of knowledge and application expertise. Enabled by sophisticated control mechanisms, the aNIR-technology allows drying aqueous ink onto

Read more

The Truepress & adphosNIR Technology Helps Take Inkjet Printing Offset!

Read more

Learn about curing and drying at the IMI InkJet Summer School

The IMI Europe Inkjet Summer School is the ideal way to learn more about key aspects of inkjet technology, from the basics through to advanced courses on inks, printheads and applications. Also this year, like in many years before, adphos contributes to the curing and drying sessions on Thursday, June 13th and Friday, June 14th, 2019.

25 years’ experience in optimized drying solutions

Through the investigation and delivery of thousands of drying/curing projects, adphos has gained a great depth of knowledge and application expertise – ranging from drying aqueous ink onto thin films to drying

Read more

adphos, profi-tec/profi-jet und MCS luden Industrieexperten zum Open House Event nach Bruckmühl ein

Bruckmuehl, June 2019

adphos Digital Printing GmbH, eine der weltweit führenden Experten für Inkjet-Trocknung und -Vernetzung, lud 45 Industrieexperten zu einem Open House Event (16.-17. Mai 2019) mit dem Fokus Digitaldrucklösungen. Die Veranstaltung fand in der adphos Zentrale in Bruckmühl in Deutschland statt. In Kooperation mit profi-tec | profi-jet GmbH, dem europäischen Vertriebshändler der MCS Incorporated USA, wurde das Hochgeschwindigkeits-InkJet-Drucksystem „TK1740“ von MCS, das mit einem NIRWeb-IV-20 betrieben wird, vorgestellt. Ferner wurde eine Einzelblattanwendung

Read more

Solving Quality Problems with NIR Drying [Video]

Interview with President Dr. Bär

Dr. Kai Bär of the adphos Group is a leading expert on NIR (Near Infrared) Drying, Curing and Sintering. Elizabeth Gooding had the opportunity to sit down with him and talk about the role that drying technology plays in achieving quality output with production inkjet.

Read entire story over at Inkjet Insight.

Read more

adphos, Profi-Tec / Profi-Jet und MCS
veranstalten Open House Event in Bruckmühl

Bruckmuehl, April 2019

adphos Digital Printing GmbH, eine der weltweit führenden Experten für Inkjet-Trocknung und -Härtung, lädt am zu einem Open House Event (16.-17. Mai 2019) in der adphos-Zentrale in Bruckmühl ein. In Kooperation mit profi-Tec | profi-Jet GmbH, dem europäischen Vertriebshändler der MCS Incorporated, USA, wird das Hochgeschwindigkeits-InkJet-Drucksystem „TK1740“ von MCS, das mit einem NIRWeb-IV-20 betrieben wird, vorgestellt. Ferner wird eine Einzelblattanwendung in Zusammenarbeit mit der Popp Maschinenbau GmbH und der Palamides GmbH demonstriert.

Read more

adphos Open House: Pre-Announcement

adphos Group Open House

May 16th/17th, 2019

Due to limited capacity please register your free attendance ticket now at:

  • adphos Digital Printing GmbH
  • Bruckmühler Strasse 27
  • 83052 Bruckmühl/Germany
  • Phone: +49 (0) 8061 395-213
  • Fax: +49 (0) 8061 395-110
  • E-Mail: alexandra.schoeps@adphos.de
  • www.adphos.de

Thank you for sending your answer latest until May 2nd, 2019.

The participation at the adphos Open House is free of charge and includes the catering during the event and the dinner on May16th, 2019.
Travel costs and the overnight stay has to paid by the participant.

Overnight Accommodation

Read more