Publications

High Performance Drying and Thermal Processing within Seconds | #197

• Journal of Japan Coating Technology Association, Vol. 47/No. 4, 2012

• (Dr. Kai K. O. Bär, adphos Thermal Processing GmbH)

NIR-Technologie – ein neuer Ansatz für thermische Prozesse bei der Verpackung von Pharmaprodukten | #166

• Pharm. Ind. 69 Nr. 2, 234-238/2007

• (Rolf Wirth, Michael Dienz)

Spot Repair mit NIR | #127

• Besser Lackieren, Nr. 5, 21.03.2003 Seite 8

Effects of Highly Absorbing Pigments on Near Infrared Cured Polyester/Melamine Coil Coating | #342

• Public Version “Progress in Organic Coatings” Science Direct

• (I. Mabbet, J. Elvins, C. Gowenlock, P. Jones, D. Worsley, SPECIFIC, College of Engineering, Swansea University)

Effects of highly absorbing pigments on near infrared cured polyester/melamine coil coatings | #328

• Progress in Organic Coatings 76 (2013) 1184-1190

• (Publication of Swansea University)

Zero CO2-Emissions with high Energy Saving Potential | #316

• Null CO2-Emissionen bei hohem Energieeinsparungspotential

• (Dr. Kai K. O. Bär, adphos Thermal Processing GmbH)

Electro-thermal Driers Allow Zero CO2-Emission Operation with Additional Large Potential of Energy Reduction in Coil Coating | #308

• 54th ECCA Autumn Congress November 23rd/24th, 2020 – Virtual Conference

• (Dr. Kai K. O. Bär, adphos Thermal Processing GmbH)

Advancements in Thermal Drying Processes; Can Further Efficiency be Achieved? | #230

• Metall Bulletin 19th Galvanizing [&] Coil Coating Conference, September 10th/11th, 2014 Abu Dhabei/United Arab. Emirates

• (Dr. Kai K. O. Bär, adphos Thermal Processing GmbH)

Alternative Changes and Strategies for Energy Savings with New Compact Coil Coating Concepts | #227

• ECCA 47th Autumn Congress, November 18th/19th, 2013 Brussels/Belgium

• (Andreas Geitner, Dr. Kai K.O. Bär, adphos Thermal Processing GmbH)

Coil Coating für kleine Lose | #225

• MO Metalloberfläche Ausgabe Oktober 2013

• (Dr. Jörg Sander Dr. Sander surface technologies, Friedrich Bielefeld Technical Consultant)

New Supply Chains and New Opportunities for Coil Coaters to Gain Market Share of Post-Painted Complete Good | #224

• MetalBulletin 18th Galvanizing [&] Coil Coating Conference September 10th/11th, 2013 Munich/Germany

• (Dr. Kai K. O. Bär adphos Thermal Processing GmbH, Friedrich Bielefeld Technical Consultant)

CO2-freie organische Bandbeschichtung bis 2020 | #219

• JOT 2-2013 (Dr. Kai K. O. Bär, adphos Thermal Processing GmbH)

New Opportunities, Added Value and Lower Cost Coil Coating with Strong Reduced Emissions | #216

• ECCA 46th Autumn Congress, November 26th/27th, 2012 Brussels/Belgium

• (Dr. Kai K. O. Bär adphos Thermal Processing GmbH)

CO2-Free Coil Coating – Naive Dream or Realistic Scenario? | #208

• 17th Galvanizing [&] Coil Coating Conference, September 20th/21st, 2012 Barcelona/Spain

• (Dr. Kai K. O. Bär, Andreas Geitner, Michael Schumann, adphos Thermal Processing GmbH)

Organic Color Coating of Stainless Steel | #207

• 5th International Stainless Steel Symposium [&] Exhibition, September 18th – 20th, 2012 Düsseldorf/Germany

• (Dr. Kai K. O. Bär, adphos Thermal Processing GmbH, Friedrich W. Bielefeld Consultant, Dr. Jörg Sander Sander Dr. Sander Surface Technologies)

Novel Approaches in NIR-Curing Technology | #206

• Progress in Organic Coatings 64-2009

• (R. Knischka, U. Lehmann, U. Stadler, M. Mamak, J. Benkhoff, Ciba Holding Inc., Basel/Switzerland –Tarrytown/USA)

Inline-Bandbeschichtung on Demand - Bandprozesse in einem Fluss | #202

• JOT 7-2012

• (Dr. Kai K. O. Bär, adphos Thermal Processing GmbH)

Vergleich der Trocknungstechnologien bei Bandbeschichtungen/ Evaluation of Drying Technologies in Coating Application | #200

• Coating International 6-2012

• (Dr. Kai K. O. Bär, adphos Innovative Technologies GmbH)

Clean Technologies in Coil Coating – Present and Future Advances | #194

• 45th ECCA Autumn Congress, November 21st/22nd, 2011, Brussels/Belgium

• (Dr. Kai K. O. Bär, adphos Thermal Processing GmbH)

Coats of Many Hues and Roles | #193

• Metal Bulletin Focus, September 12th, 2011

• (Dr. Kai K. O. Bär)

New Innovative Powder Coating Technology for Coil Coating! | #192

• MPT International No. 3/2011 (Peter Kloppers, Robin de Hoog, EMB Technology BV, Netherlands)

• (Kai K.O. Bär, adphos Thermal Processing GmbH)

Green Solutions in Coil Coating –Can it be affordable as well as profitable? | #191

• 16th Galvanizing [&] Coil Coating Conference, Metal Bulletin, September 2011, Mailand

• (Kai K.O. Bär, adphos Thermal Processing GmbH)

Ultraschnelle Heizung, Trocknung und Vernetzung in der Behandlung | #190

• elektrowärme International, Heft 02/2011 - Juni

• (Kai K.O. Bär, adphos Thermal Processing GmbH)

New Process Integrated in Galvanizing Line - Added Value Grants Future Success! | #189

• 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet; GALVATEC Genua, Italien, 21.-24. Juni 2011

• (Kai K.O. Bär, Andreas Geitner, adphos Thermal Processing GmbH)

Technische Konzepte für Bandbeschichtungsverfahren in Compact Coil Coating Anlagen | #188

• Technische Akademie Wuppertal e.V., 29. März 2011, Wuppertal

• (Kai K.O. Bär, adphos Thermal Processing GmbH)

Strategies for Cutting Production Costs in Coating Lines | #187

• MetalBulletin 15th Galvanizing[nbsp][&] Coil Coating Conference, 28./29. September 2010, Istanbul/Turkei

• (Kai K.O. Bär und Andreas Geitner, adphos Thermal Processing GmbH)

Reticulation of Coatings for Coil-Coating in NIR-Ovens | #186

• ipcm International Paint [&] Coating Magazine No. 2-March, 2010

• (Ezio Pedroni, Salchi Metalcoat Srl, Burago Molgora (Mb), Italy)

Trocknen im Schnelldurchgang | #185

• MO Metalloberfläche Ausgabe Januar/Februar 2010

• (Carsten Blumenstengel MO in Zusammenarbeit mit Michael Schumann)

Inline Bandbeschichtungen gehört die Zukunft | #184

• 7. Internationales NIR Symposium Coil Coating – Beitrag “besser lackieren” Ausgabe Nr. 18, 6. November 2009

• (Kai K. O. Bär, adphos Thermal Processing GmbH)

Metallurgica Marcegaglia Hot Dip Galvanizing Lines with Inline Painting | #183

• AIST Annual Meeting April 2009

• (Christian Bini, Danieli Wean United)

New Solutions in Coil Coating Production | #182

• 14th International Galvanising [&] Coil Coating Conference, 22nd / 23rd of September 2009, Prague

• (Antonio Bonoli, Marcegaglia S.p.A.)

Gaining Money in Crisis – Replacement and Modernization Investments in Coil Processing Lines for Reduced Operation Cost | #181

• 14th International Galvanising [&] Coil Coating Conference, 22nd / 23rd of September 2009, Prague

• (Kai K. O. Bär, adphos Thermal Processing GmbH)

New Changes for Success even in Crises – Technological Opportunities for Cost Savings and Efficiency Increase in Strip Processing | #180

• Steel Success Strategies XXIV, American Metal Market 22nd – 24th of June 2009, New York/USA

• (Kai K. O. Bär, Niels Frederiksen)

Essential Cost Saving Opportunities to Earn Money in Crisis | #179

• 05th Indian Steel Conference of Metal Bulletin Events, 19th/20th of May 2009, Mumbai/India

• (Kai K. O. Bär/Andreas Geitner)

Kompakte Bandbeschichtungsanlagen für Effektlackierung und tiefziehfähige Grundierung „Technische Konzepte für Bandbeschichtungsverfahren in Kompaktanlagen“ | #178

• TAE Technische Akademie Esslingen, 19. November 2008, Ostfildern-Nellingen

• (Kai K. O. Bär)

Kompakte Bandbeschichtungsanlagen für Effektlackierung und tiefziehfähige Grundierung „Einführung und Überblick“ | #177

• E Technische Akademie Esslingen, 19. November 2008, Ostfildern-Nellingen

• (Kai K. O. Bär)

NIR-Based Integrated Modular Solutions for CCL`s – Energy Savings, Ecological Friendly and Reduction of Conversion Costs in Organic Coil Coating | #176

• ECCA Autumn Congress, 17th / 18th of November 2008, Brussels/Belgium

• (Kai K. O. Bär)

The Science of Near Infra-Red Curing | #175

• ECCA Conference 1st of October 2008, Newport/United Kingdom

• (Claus Grapengieser)

NIR for Electro Coatings | #174

• Open House Fa. Hymmen GmbH, 09th of September 2008, Bielefeld/Germany

• (Claus Grapengieser)

Application Potential of NIR-Technology in Coil Processing Lines | #173

• 3rd International Conference on ThermoMechanical Processing of Steels, 10th – 12th of September 2008, Padova/Italy

• (Kai K. O. Bär/Andreas Geitner)

Integrated Modular Solutions for Colour Coating Lines | #172

• 13th Galvanizing [&] Coil Coating Conference of Metal Bulletin Events, 03rd – 05th of September 2008, Valencia/Spain

• (Kai K. O. Bär)

The Coupled Galvanising and Painting Line at Marcegaglia Ravenna | #171

• MPT International June 2008

• (Manuel Bianco, Danieli Wean United, Buttrio (UD), Italy)

Cost Drivers in Coil Coating – Most expected, mostly unexpected and partially even unknown | #170

• Coil World November/December 2007/Vol 12/Issue 6

• (Kai K. O. Bär)

Instant Curing – Near-infrared technology can substantially improve production line efficiencies by reducing curing times to mere seconds | #169

• Finishing Today, October 2007

• (Kai K. O. Bär, Niels Frederiksen)

NIR Cost Drivers in Coil Coating – Most Expected, Most Unexpected and Mostly Unexpected Ones! | #168

• Metal Bulletin Conference, Istanbul/Turkey, September 2007

• (Kai K. O. Bär)

Colour Coating on Demand – A Dream Comes True | #167

• AISTech Conference, Indianapolis/USA, May 2007

• (Kai K. O. Bär, Niels Frederiksen, John Palazzolo)

Jupiter Aluminum Pioneers NIR InfraRed | #165

• Coilworld Magazine März/April 2007

• (Ron Nuckles, Jupiter Aluminum USA)

Raumfahrttechnologie ermöglicht ultimative Vernetzungsprozesse bei der Bandbeschichtung | #164

• Stahl und Eisen März 2007/Ausgabe 03

• (Kai K. O. Bär)

NIR-Technology – ultra fast drying in metal processes | #163

• DuPont Performance Coatings Austria GmbH Baden/Guntramsdorf, Workshop am 30.01.2007

• (Kai K. O. Bär)

Ultra-fast curing technology for coil coating | #162

• MPT International November 2006/Ausgabe 6

• (Kai K. O. Bär)

Colour Coating on Demand – Coil Coating has been changed now? | #161

• ECCA Conference Brüssel/Belgien, 26.11.-28.11.2006

• (Kai K. O. Bär)

Nir changes today’s coil processes – technology overview and actual experience outline | #160

• interzac conference, monterrey/mexico september 26th, 2006

• (kai k. o. bär)

New, Econmic Coil Coating Lines Utilising NIR-Drying Technology | #159

• ECCA Conference UK, September 12th – 13th, 2006

• (Kai K. O. Bär/Claus Grapengiesser)

Added value and new markets with inline coating in galvanising lines | #158

• Metal Bulletin Conference, Barcelona/Spain September 10th – 12th, 2006

• (Kai K. O. Bär)

“One, two ... cured!“ Space technology provides ultimate cure, Becker Germany invests in NIR-lab equipment! | #157

• Becker Industrial Coatings 2006, Ausgabe Juni 2006

• (Kai K. O. Bär)

New Opportunities for Inline Paint Applications in Galvanizing Linese | #156

• AISTech Conference and Exposition, Cleveland, OH – May 1st – 04th, 2006

• (Kai K. O. Bär, Jeff Anderson, Niels Frederiksen)

”Coil Coating on Demand” – Farbbeschichtungsanlage in der Größe eines Wohnzimmers | #155

• Beitrag Stahl und Eisen, Ausgabe 04/2006 vom 18.04.2006

• (Kai K.O. Bär)

Coil Coating on demand – a colour coating line fitting in a living room | #154

• MPT International Februar 2006/Ausgabe 1

• (Kai K.O. Bär)

New Concept of high ecological but also economical curing and thermal solvent treatment for today’s and future organic coatings | #153

• ECCA Autumn Congress Brüssel/Belgien 27.-29. November 2005

• (Kai K.O. Bär)

New Opportunities for Organic In-line Paint Applications in Galvanizing Lines | #152

• Galvanizers Conference, Lexington/USA 18. Oktober 2005

• (Kai K. O. Bär, Jeff Anderson, Niels Frederiksen)

Mit NIR-Technologie schnell und platzsparend trocknen | #151

• Besser Lackieren, Heft Nr. 16 vom 07.10.2005

• (Kai K.O. Bär)

Inline Paint Solutions in Galvanising Lines, New Opportunities, New Applications, New Markets | #150

• Metal Bulletin Congress, Vienna/Austria 06. – 07. Oktober 2005

• (Kai K.O. Bär)

_ _ _ nir?- Drying [&] Curing: How to save money in color coating operations | #149

• NCCA National Coil Coating Association, Technical Meeting September 2005

• (Kai K. O. Bär, Jeff Anderson, Niels Frederiksen)

International Coil Community met at Munich 5th _ _ _nir? - Coil Coating symposium held at AdPhos | #148

• Beitrag Steel Grips, Ausgabe Sommer 2005

Ultra Fast _ _ _nir? - Drying and Curing Technology- What makes _ _ _nir? - Systems Stand Out in the Coil Process? | #147

• Beitrag Coil World USA, Ausgabe September/Oktober 2005

• (Kai K.O. Bär)

Einsatzmöglichkeiten der NIR – und Induktionstechnologien für thermische Metallprozesse und die Behandlung von organischen Beschichtungen in Bandanlagen | #146

• Beitrag Elektro Wärme, Ausgabe Heft 1 März 2005

• (Kai K.O. Bär)

How to save energy costs with the NIR¹ - Technology in coil coating processes | #145

• Beitrag Steel Grips 03/2006

• (Kai K.O. Bär)

Inline-Beschichten in Bandverzinkungsanlagen | #144

• Beitrag JOT , Ausgabe 01/05

• (Kai K.O. Bär)

NIR-Booster Solutions – Payback within 12 Months! | #143

• ECCA Autumn Congress – Brussels, Belgium, Nov. 21. – 23. , 2004-11-30

• (Kai K.O. Bär)

NIR-Technology – New Opportunities for Metal Processing and Metal Coating Lines | #142

• Metallurgical Process Technology Conference – Riva del Garda, Italy, Sept. 19 – 21,2004

• (Kai K.O. Bär)

Kembala Lines (Bluescope Steel) | #141

Technological Be´s and Can´t Be´s in Coating Processes – Visions become real! | #140

• ECCA Spring Meeting Salzburg 06.-09. Juni 2004

• (Kai K.O. Bär)

Blechlackierung mit innovativer NIR-Trocknung | #139

• (Eisenmann)

Coil Coating für organische Beschichtung | #138

• (Eisenmann)

NIR-Trockner für Coils im Einsatz | #137

• Besser Lackieren, Nr. 14, 05.09.2003

• (Kai K.O. Bär)

Korrosionsschutzprimer für Automobilblech | #136

• Beitrag JOT Ausgabe Nr. 9/2003

• (Kai K.O. Bär)

Potential Use for Innovative Near Infraread-Drying/Curing in Coil Coating Technology | #135

• ECCA Autumn Congress, Bruxelles, 16.-18. November 2003

• (Kai K.O. Bär)

NIR-Technology – An Innovation in Coil Coating | #134

• NCCA 2003 Fall Technical Meeting, 01.-03. Oktober 2003

• (Kai K.O. Bär)

NIR-Technology – New Application Potential in Galvanizing Lines | #133

• 8th International Galvanizing [&] Coilcoating Conference, 30th September Barcelona

• (Kai K.O. Bär)

NIR-Technology – Novel Potential use in Coil and Coating Lines | #132

• ESTAL Congress 2003, 25.-27.09.2003 Antwerpen

• (Kai K.O. Bär)

Coils mit NIR Platz sparend trocknen | #131

• Besser Lackieren, Nr. 13, 01.08.2003

NIR-Anlage für Bandaufheizung (Hydro) | #130

• Beitrag JOT Ausgabe Nr. 5/2003

Stahlrunde | #129

• 08.07.2003

• (Kai K.O. Bär)

Einsatzpotential der NIR-Technologie in Bandanlagen | #128

• Elektro Wärme, März 2003

• (Kai K.O. Bär)

Pressemitteilung 4. NIR-Symposium, Galvanotechnik, Februar 2003, 94. Band | #126

Near-infrared curing | #125

• Powder Coating No. 8, Nov 2002

Strip coatings dried in Seconds | #124

• Aluminium Nr. 79, Jan. 2003

High Performance and Efficient IJ-Printing in Packaging – What Makes the Difference? | #345

• InPrint March 14th – 16th, 2023, Munich/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

aLITE-Plattformtechnologie zum energiesparenden und CO2-neutralen Trocknen und Fixieren (only in German available) | #344

• AFBW Arbeitsgemeinschaft Faserbasierter Werkstoffe e.V. Online Seminar 09. Februar 2023

• (Günther Laukhardt, Volker Nitsche, adphos Innovative Technologies GmbH)

Turning Point Towards Sustainalbe Drying (published in German Language: Zeitenwende hin zur nachhaltigen Trocknung) | #343

• Flexo+Tief-Druck Issue 6-2022

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

aLITE-Processing – Game Changer für (Pre-/Post) Print Prozesse im Verpackungsbereich (nur in Deutsch verfügbar/only in German available) | #340

• bdvi das Verpackungsnetzwerk – Virtual - October 28th, 2022

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Functional Coatings in Combination with NIR Drying | #339

• 11th International Textile Coating & Laminating Congress September 22nd/23rd, 2022 Ghent/Belgium

• (Evelyn Lempa, Niederrhein University of Applied Sciences; Dr. Dorothee Bär, Dr. K. O. Bär, adphos Digital Printing GmbH)

Multi-layer-coating for conductive textiles with drying via NIR-Technology Multi-Layer-Beschichtung für leitfähige Textilien mit Trocknung über NIR-Technologie | #336

• Research project / Forschungsprojekt AiF – ZIM Project EL-FIB

• (Evelyn Lempa, Niederrhein University of Applied Sciences; Dr. Dorothee Bär, adphos Digital Printing GmbH)

Saving energy and CO2 emissions with electrothermal drying systems | #334

• Converting Quarterly Issue Q2-2022

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Want more performance, quality and no CO2-emissions – aLITE® - thermal Processing! | #333

• AIMCAL R2R Europe Conference June 7th – June 9th, 2022, Valencia Spain

• (Andreas Geitner/Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Advanced NIR (aNIR) drying technology: - A game changer for industrial printing and coating processes but what makes aNIR so special? | #331

• IPI Industrial Print Integration Conference, May 18th - May 19th, 2022, Düsseldorf/Germany

• (James Burbidge, adphos Digital Printing GmbH)

What means drying: What is necessary to get a proper “dried” product? | #330

• IPI Industrial Print Integration Conference, May 18th - May 19th, 2022, Düsseldorf/GermanyIPI Industrial Print Integration Conference, May 18th - May 19th, 2022, Düsseldorf/Germany

• (James Burbidge, adphos Digital Printing GmbH)(James Burbidge, adphos Digital Printing GmbH)

Pre- and Post-Print Processing with Infrared Based Driers – Working Principles, Performance and Limitations | #329

• iNPRINT March 15th – 17th, 2022, Munich/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Saving energy and CO2 emissions with electrothermal drying systems - benchmark comparison with gas convection dryers for the decor sector | #327

• Einsparung von Energie und CO2-Emissionen mit elektrothermischen Trocknungssystemen – Benchmark-Vergleich mit Gaskonvektionstrocknern für den Dekorbereich

• (Flexo+Tief-Druck Issue 6-2021 (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

New Developments in Multi-Layer Coating for Conductive Textiles with Interim Drying Via NIR-technology and Associated Power-Supply | #326

• ADDITC 2021 Aachen Dresden Denkendorf International Textile Conference, November 9th/10th, 2021 – Virtual Conference

• (Dr. Dorothee Bär, adphos Innovative Technologies GmbH, Bruckmühl/Germany; Evelyn Lempa, Anne Schwarz-Pfeiffer, Research Institute for Textile and Clothing, Niederrhein University of Applied Sciences, Möchengladbach/Germany; Harmen Rooms, Coatema Coating Machinery GmbH, Dormagen/ Germany; Rüdiger Moll , IMST GmbH Kamp-Lintford/Germany; Marc van Parys, Rüdiger Vanmaele, Fibertex NV, Wevelgem/Belgium; Wim Defereme, Dieter Reenaers, University Hasselt/Belgium)

Electroluminescent Textiles for Home Interior Decoration | #324

• OPE Journal No. 34/March 2021

• (Evelyn Lempa, Anne Schwarz-Pfeiffer, Research Institute for Textile and Clothing, Niederrhein University of Applied Sciences, Möchengladbach/Germany; Harmen Rooms, Julian Koc-Ritter, Coatema Coating Machinery GmbH, Dormagen/ Germany)

Possibilities for Future Efficiency Enhanced and CO2 Reduced Printing in Décor and Packaging Applications | #323

• GAA AIMCAL R2R Conference, October 19th – 21st, 2021, Orlando, Florida/USA

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH, John Palazzolo, AdPhos North America Inc.)

Energy and CO2 Reduction Potential with Electro-Thermal Drying Technology – Benchmark Study with Gas Convection Driers | #320

• ERA Annual & Packaging/Decorative Conference

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Inkjet Printing on Plastic | #317

• Specialist Printing Worldwide Issue 3/2021

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Pre- and Post-Processing Challenges for Water-Based Inkjet Printing on Packaging and Explores the Limitations Currently Impeding its Progress in Certain Sectors | #315

• Specialist Printing Worldwide Issue 2/2021

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

aNIR-drying solutions for flexo- and gravure printing | #314

• Flexo+Tief-Druck Issue 2/2021

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

A new wind blows in - A new drying technology is claiming to deliver improved productivity, enhanced print quality and energy efficiency with zero CO2 emissions | #313

• FlexoTech Issue 197 March/April 2021

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Coatings drying with advanced aNIR-Technology | #312

• Flexo+Tief-Druck Issue 1/2021

• (Trocknen von Beschichtungen mit advanced aNIR-Technologie)

Energy-Efficient Drying Technology for Textile Manufacturing | #311

• World Congress on Textile Coating February 11th/12th & February 18th/19th, 2021 – Online

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

NIR Drying Reducing Energy Needed and Reducing CO2-Output | #306

• AIMCAL R2R Conference & SPE FlexPackCon October 23rd, 2020 – Virtual Conference

• (Dr. Kai K. O. Bär, Frank de Jonge, adphos Digital Printing GmbH

CO2-Tax – How it Effects Gravure Printing | #305

• ERA Annual Conference October 5th/6th, 2020, Hamburg/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Layer Morphology and Ink Compatibility of Silver Nanoparticle Inkjet Inks for Near-Infrared Sintering | #304

• Institute for Materials Research, Nanomaterials Basel, Online Publication May 7th, 2020

Technical Blog, NIR drying system increase printing speed by 60% | #303

• Kuen Yuh Machinery Engineering Co., Ltd.

Unknowns, Misleadings and Misconclusions – Several Facts Must be Considered for InkJet Processing | #302

• Coating International 04-2020

Drying of Water Based InkJet Printing Processes | #299

• Open House at KAO Corporation November 14th, 2019, Barberá del Vallés (Barcelona)/Spain

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Drying, Pre- and Post-Processing of InkJet Printing with Infrared Technologies | #298

• InPrint International Exhibition of Print Technology for Industrial Manufacturing November 12th – 14th, 2019, Munich/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

“aNIR – Enabler for Pre/Post InkJet Processing” | #279

• The InkJet Conference October 16th/17th, 2018, Duesseldorf/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

NIR-Technology an Enhancer in Gravure and Flexo Printing for Décor and Packaging | #278

• GAAmericas Gravure Technical Forum October 10th – 11th, 2018, Cincinnati, Ohio/USA

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

Enhances of aNIR-Drying in Textil Printing Applications | #277

• 5th International Digital Textile Congress September 27th – 28th, 2018, Ghent/Belgium

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

NIR-Technology – Enabler for High Performance InkJet Printing in Packaging & Decorative Applications | #274

• 2nd ERA Digital Forum June 12th – 13th, 2018, Riga/Latvia

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

High-Performance Solution not Only for Drying ink | #271

• Coating International 04-2018

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

High-Performance Instantaneous Drying for Coatings in Paper Finishing Lines | #270

• Specialty Papers Europe April 23rd-25th, 2018, Cologne/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

aNIR- Technology an Enhancer for InkJet Post-Proccessing | #269

• The IJC USA April 12th/13th, 2018, Chicago/USA

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Was macht NIR-Trocknung so speziell? | #267

• SIP Fachmagazin für Siebdruck & Digitaldruck 01-2018

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH) only in German available

aNIR an Enabler for New Digital Production Concepts in Packaging | #266

• Digital Print for Packaging EU December 5th – 7th, 2017, Berlin/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

aNIR Technology an Enabler for Instantaneous Post Printing Processes | #265

• INPRINT November 14th – 16th, 2017, Munich/Germany

• (Dr. Kai K. O. Bär, James Burbidge, adphos Digital Printing GmbH)

aNIR Technology – Drying at the Speed of Light | #264

• 12th European Coating Symposium November 8th – 10th, 2017, Fribourg/Switzerland

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Innovative Drying Technology for Water and Solvent Based Inks and Coatings | #263

• ERA Packaging & Decorative Conference November 7th/8th, 2017, Barcelona/Spain

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

How to Overcome the Limitations of InkJet Printing | #262

• Packaging Specialist Printing Worldwide 04-2017

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Instantaneous and Low Thermal Stress Inkjet Post-Processing | #261

• The InkJet Conference October 24th/25th, 2017, Duesseldorf/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

aNIR-Drying Technology for Instantaneous Setting, Drying and Fixation of Textile Printing Applications | #259

• 9th International Textile Coating and Laminating Congress September 28th/29th, 2017 Ghent/Belgium

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

High Performance Instantaneous Drying Solutions for Coatings in Paper Finishing Lines | #258

• Coating International 06-2017

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

Comparison of Systems | #257

• IMI Europe – Inkjet Summer School, June 12th – 16th 2017, Ghent/Belgium

• (Martin Doherty, James Burbidge, adphos Digital Printing GmbH)

Paper and Ink Characteristics – Spectral Absorption | #256

• IMI Europe – Inkjet Summer School, June 12th – 16th 2017 Ghent/Belgium

• (Martin Doherty, James Burbidge, adphos Digital Printing GmbH)

Principles of Wetting & Setting, Absorption in Porous & Non-Porous Media | #255

• IMI Europe – Inkjet Summer School, June 12th – 16th 2017, Ghent/Belgium

• (Martin Doherty, James Burbidge, adphos Digital Printing GmbH)

Introduction | #254

• IMI Europe – Inkjet Summer School, June 12th – 16th 2017, Ghent/Belgium

• (Martin Doherty, James Burbidge, adphos Digital Printing GmbH)

Improving Speed and Print Quality in Digital Textile Printing | #253

• Digital Print Week, June 5th – 9th, 2017, Atlanta, GA/USA

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH, Niels Frederiksen, Adphos North America, Inc.)

Ultrafast Heating for Accelerated 3d-Manufacturing Cycles | #252

• Digital Print Week, June 5th – 9th, 2017, Atlanta, GA/USA

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH, Niels Frederiksen, Adphos North America, Inc.)

adphosNIR® – Solutions, Case Studies and Benefits in Functional InkJet Printing Application | #250

• IMI Europe InkJet Ink Development Conference March 15th/16th, 2017 Lausanne, Switzerland

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

adphosNIR® Based High Performance Drying – Drying can Decisively Determine the Print Quality and Print Performance | #249

• VDD Seminar TU Darmstadt, October 20th, 2016, Darmstadt, Germany

• (Dr. Kai. K. O. Bär, adphos Digital Printing GmbH)

Trying to Overcome the Misleading and Misunderstanding of Drying in InkJet Processes | #248

• The InkJet Conference October 5th/6th, 2016, Duesseldorf, Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Instantaneous Drying of Textile Printing Process with adphosNIR®-Technology | #246

• 4th International Digital Textile Congress September 15th/16th, 2016 Ghent, Belgium

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

How to Avoid Wavy Substrates in Digital Printing | #245

• Coating International 04-2016

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

Understanding the Ink Drying Process and Its Impact on Print Performance? | #244

• IMI Europe InkJet Ink Development Conference April 13th/14th, 2016 Lausanne, Switzerland

• (Dr. Kai K.O. Bär, Michael Schumann, adphos Digital Printing GmbH)

Why can an Inkjet Product Smear – Even Though it is Fully Dried? | #243

• Coating International 09-2015

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

Optimized Drying and Curing Processes for New Functional Products | #242

• InPrint November 10th – 12th, 2015, Munich/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Wetting, Setting and Fixation Mechanisms of InkJet Dryer and How Dryer can Substantially Effect Print Quality and Performance | #241

• The InkJet Conference October 7th/8th, 2015, Duesseldorf, Germany

• (Michael Schumann, Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Instantaneous Drying and Photonic NIR-Curing | #240

• ECS European Coating Symposium, September 9th – 11th, 2015, Eindhoven/The Netherlands

• (Dr. Kai K. O. Bär, Michael Schumann, adphos Digital Printing GmbH)

Who needs drying technology? | #239

• IMI Industrial Inkjet Showcase Munich, June 25th, 2015

• (Martin Doherty, adphos Digital Printing GmbH)

IMI – Focusing on Inkjet – Presses! How Print Quality and Performance is Influenced by Ink Wetting to Ink Fixation in Digital Presses | #238

• IMI Industrial Inkjet Showcase Munich, June 25th, 2015

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Der Zusammenhang zwischen Trocknung und Qualität im InkJet Druck/The correlation between the drying process and quality in InkJet printing | #233

• Coating International 10-2014

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

Improving Image Quality! What Happens after your Inkdrop Reaches the Substrate? | #232

• IMI Europe Conference/Digital Printing Week November 4th - 7th, 2014 Barcelona/Spain

• (Martin Doherty, adphos Digital Printing GmbH)

Setting, Drying and Fixation Process for InkJet Applications - Todays High Performance Solutions, Planned Enhancements for Future Trends | #229

• HP Drying and Curing Open Technology Fair, April 2nd-4th, 2014 Barcelona, Spain

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

Trocknung mit nichtionisierender Strahlung | #228

• Flexo+Tief-Druck Ausgabe 6-2013

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

High Performance Drying Technology | #226

• Packaging Films Volume 4 October 2013

• (Dr. Kai K. O. Bär adphos Digital Printing GmbH)

Efficiency, Ecology and Economy in Inkjet Drying | #221

• IMI Ink Jet Technology Showcase June 05th/06th, 2013 Barcelona/Spain

• (Martin Doherty adphos Digital Printing GmbH)

Wet and Dry A Comparative Review of Water Based Inkjet Drying Technologies | #215

• IMI 21st Annual Inkjet Printing Conference, February 1st – 3rd, 2012 Florida/USA

• (David Pelling AdPhos UK Ltd.)

I/J Manufacturers’ Dream Supplier | #214

• IMI Europe 20th Annual Ink Jet Conference, November 7th – 9th, 2012 Barcelona/Spain

• (Martin Doherty AdPhos UK Ltd.)

The Feasible Production of Integration Printed Electronics into Commercial Graphic Printing | #213

• IMI Europe 20th Annual Ink Jet Conference, November 7th – 9th, 2012, Barcelona/Spain

• (David Pelling AdPhos UK Ltd.)

High Performance Drying for Digital Printing | #212

• Packaging Europe Volume 7.5, 2012

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Water Based Inkjet Drying | #211

• Print Efficiently UK, October 10th, 2012 London UK

• (David Pelling, adphos UK, Ltd.)

Hybrid Printing – Drying is Key to Performance and Profit | #210

• Print Efficiently UK, October 10th, 2012 London UK

• (Dr. Kai K. O. Bär adphos Printed Technologies GmbH)

High-Speed Drying of Coatings | #201

• Packaging Films 2-2012 Volume 3

• (Dr. Kai K. O. Bär adphos Digital Printing GmbH)

Short-Wave High-Performance Drying/Kurzwellige Hochleistungstrocknung | #198

• DRUPA Daily Report May 6th, 2012

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Advanced Drying Technology for Water Based Inkjet | #196

• IMI Suppliers Forum Barcelona, June 08th/09th, 2011

• (David Pelling, Adphos UK Ltd.)

Wet and Dry – A Comparative Review of Water Based Inkjet Drying Technologies | #195

• IMI Conference Lisbon, November 09th - 11th ,2011

• (David Pelling, Adphos UK Ltd.)

BearLITE – Processing – Now Proven, Enables New Battery Manufacturing | #341

• IBPC International Battery Production Conference November 7th – 8th, 2022 Braunschweig/Germany

• (Dr. Kai K. O. Bär, adphos Innovative Technologies GmbH)

BearLITE®-Process Game Changer for Battery Manufacturing?! | #338

• Car Battery Congress September 14th – 15th, 2022, Braunschweig & Salzgitter/Germany

• (Dr. Kai K. O. Bär, adphos Innovative Technologies GmbH)

Increased Productivity for Battery Electrodes (published in German Language: Produktivitätssprung für Batterieelektroden) | #337

• MO Magazin für Oberflächentechnik Issue 09/2022

• (Dr. Kai K. O. Bär, adphos Innovative Technologies GmbH)

BearLITE® processing – Key enabler for enhanced performance and lower costs in cell production | #332

• European Electric Vehicle Batteries Summit 2022, June 8th – 9th, 2022, Rotterdam/Netherlands

• (Dr. Kai K. O. Bär, adphos Innovative Technologies GmbH)

Performance Increase and Process Enhancements for Capacitors and Batteries Production by aLITE-Technology | #325

• IBPC2021 November 1st /2nd, 2021, Braunschweig/Germany

• (Dr. Kai K. O. Bär, adphos Innovative Technologies GmbH)

adphosNIR® Photonic Drying and Curing for PE | #307

• ELANTAS Printed Electronic Days, September 29th/30th, 2021 - Virtual Conference

• (Frank de Jonge, adphos Digital Printing GmbH)

aNIR® - A New Drying, Baking and Thermal Processing Solution – a Key Enabler for Battery Productions | #321

• Batteries Event, September 29th – October 1st, 2021, Lyon/France

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Layer Morphology and Ink Compatibility of Silver Nanoparticle Inkjet Inks for Near-Infrared Sintering | #319

• Nanomaterials 2020, 10, 892; doi: 10.3390/nano10050892

• (Wim Defereme, Institute for Materials Research (IMO), Universiteit Hasselt, Diepenbeek/Belgium)

aNIR-Technology – A Game Changer in Electrode Production? | #307

• IBPC2020 November 2nd/3rd, 2020 – Virtual Conference

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

New Possibilities for 3D-Printed Electronics Through NIR-Technology | #276

• 2nd Practical Forum 3D-Printed Electronics September 26th, 2018, Würzburg/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Verbesserte Prozesse und neue Möglichkeiten mit NIR-Technologie | #275

• Elektronikpraxis 17-2018

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Application and Fundamentals of NIR Drying Technology | #273

• 10th Short Course Coating and Drying of Thin Films June 4th – 8th, 2018, Eggenstein-Leopoldshafen/Germany

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

Applications of NIR-Drying Technology | #272

• 9th Short Course Coating and Drying of Thin Films May 29th - June 2nd, 2017, Eggenstein-Leopoldshafen/Germany

• (Dr. Kai K.O. Bär, James Burbidge, adphos Digital Printing GmbH)

aNIR Technology an Enhancer in 3D-Manufacturing Process | #268

• 3D Printing Electronics Conference January 23rd, 2018, Eindhoven/The Netherlands

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

aNIR-Photonic Drying and Sintering of Conductive Coatings | #260

• 16th International Coating Symposium October 18th/19th, 2017, Dormagen/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Instantaneous Drying and Sintering of Water or Solvent Based Conductive Coatings | #251

• LOPEC Conference and Exhibition, March 29th/30th, 2017, Munich/Germany

• (Dr. Kai K. O. Bär, adphos Digital Printing GmbH)

Influences of Near Infrared Sintering on Flexo Printed Conductive Tracks on PET and Paper Substrates | #247

• Master Thesis September 27th, 2016

• (Reha Mert Akyüz, Technische Universität Chemnitz Insitute for Print and Media Technology Digital Printing and Imaging Technology; adphos Digital Printing GmbH)

Hybrid Drying and Curing Equipment for Multi-Layer Flexible Electronics | #237

• LOPEC Conference and Exhibition, March 3rd - 5th , 2015, Munich/Germany

• (Dr. Kai K. O. Bär, M. Schumann, adphos Digital Printing GmbH, Jeff Anderson, Adphos North America Inc.)

Near Infrared Radiation as a Rapid Heating Technique for TiO2 Films on Glass Mounted Dye-Sensitized Solar Cells | #236

• Hindawi Publishing Corporation (Publication of Swansea University UK)

Ultrafast Near-Infrared Curing of PEDOT:PSS | #235

• Organic Electronics 15 (2014) 1126-1130

• (Publication of Swansea University and Tata Steel UK)

adphosNIR - Effective Drying and Photonic Sintering Technology for PE-Applications | #234

• IPSO Conference November 20st/21st, 2014 - Gardanne/Aix-en-Provence

• (Michael Schumann, adphos Digital Printing GmbH)

Drying and Sintering - A Crucial Process Step for PE-Performance and Manufacturing | #231

• The InkJet Conference September 30th/October 1st, 2014, Duesseldorf, Germany

• (Dr. Kai K.O. Bär, adphos Digital Printing GmbH)

NIR Sintering for Rapid Processing of Metallic Conduction Circuits | #223

• LOPE-C Conference and Exhibition, June 11th – 13th, 2013 Munich/Germany

• (Dr. Eifion Jewell, Dr. Justin Searle, Dr. Ian Mabbet Swansea University)

Inkjet Printer for Printed Electronics with Photonics Curing Technology | #222

• OPE Journal No. 2/2013

• (Nicolas Bernardin, Ceradrop France)

Cost Effective Patterning of Conductors Utilizing Silver Nanoparticle Inks with Traditional Printing Processes | #220

• LOPE-C Conference and Exhibition, June 28th – 30th, 2011, Frankfurt/Germany

• (Michael Mastropiero, Christopher Wargo, Matt Dollhopf PChem Associates Inc.,)

adphosNIR® Photonic Drying and Curing for Printed Electronics and other Functional Coatings | #218

• Convertec Japan, January 30th – February 1st, 2013 Tokyo/Japan

• (Dr. Kai K. O. Bär adphos Digital Printing GmbH, Takashi Umeda MKK Matsumoto Kinzoku Kogyo CO., Ltd.)

adphosNIR® Photonic High Performance Drying and Sintering – At an Affordable Cost | #217

• Printed Electronics USA, December 5th/6th, 2012 Santa Clara/USA

• (Dr. Kai K. O. Bär adphos Digital Printing GmbH, J. Palazzolo, J. Anderson AdPhos North America Inc.)

Photonic Drying and Heating Technologies for Thermal Processes in PE-Fabrication | #209

• Printed Electronic Asia, October 2nd/3rd, 2012 Tokyo/Japan

• (Dr. Kai K. O. Bär adphos Printed Technologies GmbH, Mr. Katshutoshi Matsumoto, Mr. Takashi Umeda MKK Matsumoto Kinzoku Kogyo Co. Ltd.)

Rapid Processing Technologies for Dye-Sensitized Solar Cells | #205

• LOPE-C Conference and Exhibition, June 19th/21st, 2012 Munich/Germany

• (Dr. Trystan Watson, Dr. David Worsley, SPECIFIC, Swansea University, UK)

Ultrafast Near Infrared Sintering of a Slot-Die Coated Nano-Silver Conduction Ink | #204

• Journal of Materials Chemistry 04-2011, 21, 7562

• (Martyn Cherrington, Tim C. Claypole, Davide Deganello, Ian Mabbett, Trystan Watson, David Worsley, Sustainable Coatings Research Group, Swansea University, UK)

Ultrafast Near Infrared Sintering of TiO2 Layers on Metal Substrates for Dye-Sensitized Solar Cells Progress in Photovoltaics | #203

• Research and Applications, published online in Wiley Library 2010

• (Trystan Watson, Ian Mabbett, David Worsley Sustainable Coatings Research Group, Swansea University, UK; Hongxia Wang, Laurence Peter, Department of Chemistry, University of Bath, UK)

Improve Productivity and Product Quality with NIR-Drying and Heating Technology | #199

• LOPE-C Conference and Exhibition, June 19th/21st, 2012, Munich/Germany

• (Dr. Kai K. O. Bär, M. Schumann, adphos Digital Printing GmbH, Michael Mastropiero, PChem Associates Inc., Jef