LW air cooled NIR unit
LW air cooled NIR unit
Product description
Designed and built as a light weight unit with small overall dimensions the adphos NIR-LW product family has a power density of up to 0.25 MW/m². The advantages of this product family is its low weight as well as its independency on additional cooling water or air. Through it's compactness and low weight these modules can be integrated anywhere especially if high energy densities are required on small areas. This is especially true for applications were systems are accelerated or decelerated these light weight constructions are beneficial as the mounting structure has to take less force.
The heated width of the modules can vary from 40 to 600 mm. Different NIR emitters allow for different power densities. The NIR-LW product family is the light weight among the NIR systems, which are characterised by easy integration into new and existing applications.
AC air cooled NIR unit
Product description:
High power densities of up to 0.7 MW/m² within minimised space requirements are achieved by the adphos NIR-AC product family. Depending on the application different power densities can be provided. The NIR-AC product family is a compact heating module, which can easily be integrated into new and existing systems were high power densities are required but limited space is available. The system is used in industrial steel, plastic and printing applications, where cost effective ,robust design and long life times are required.
The NIR-ACs are available with a heated length of 125 or 250 mm and in different width from 120 to 600 mm (other width on request). A glass plate to prevent contamination of the emitter and reflectors is optionally available.
As this product family is air cooled it can be used very flexible – only an external cooling blower is required.
If cooling water is preferred then the NIR-HP product family may be an option (data sheet available)
see separate data sheet - download pdf:
NIR-AC MPP aircooled - (692 KB)
